Oop's I didn't do it again.
4 posters
Page 1 of 1
Oop's I didn't do it again.
Hello all, it appears I have done a No No again. I appear to need
DR_L&Y_CL25_957> and DR_L&Y_CL27_1300>
I know I can always manage to Cock up any D/L when it comes to putting the Stock in place , but this time apart from these two I appear to have no Stock at all for the Potters.
Any assistance in pointing me towards the above two files would be greatly appreciated, Thanks Neanderthal.
PS, lovely Routes.
DR_L&Y_CL25_957> and DR_L&Y_CL27_1300>
I know I can always manage to Cock up any D/L when it comes to putting the Stock in place , but this time apart from these two I appear to have no Stock at all for the Potters.
Any assistance in pointing me towards the above two files would be greatly appreciated, Thanks Neanderthal.
PS, lovely Routes.
Roger
Re: Oop's I didn't do it again.
Hi Neanderthal
These are on UK Trainsim.
File IDs 29762 and 29763.
Good luck
Mike
These are on UK Trainsim.
File IDs 29762 and 29763.
Good luck
Mike
mikeanddi- Posts : 105
Join date : 2013-01-22
Age : 71
Location : Bromley, Kent
Re: Oop's I didn't do it again.
Thanks for that I'll pop over there now. . Albeit UKTS and my Browser don't seem to get on anymore for some reason.
Roger
Re: Oop's I didn't do it again.
They are also right here on TSSH file library - look under twomanydjs listings - you'll find them under Steam Engines - LMS
https://tsshonline.weebly.com/twomanydjs.html
https://tsshonline.weebly.com/twomanydjs.html
"Any railway that paints their locomotives such a magnificent shade of red, must be the most superior in the land" (apologies to the late David Jenkinson).
neanderthal likes this post
Re: Oop's I didn't do it again.
Would I be correct in saying theres no way to alter Consists (or make new ones) if you don't actually have MSTS installed, I've tried putting Conbuilder on but it obviously cannot find MSTS as I don't have it.
YES or NO answers would be best as I'm just not savvy with PC's. (and it'll save me a lot of time trying to do so). Ta, Neanderthal
YES or NO answers would be best as I'm just not savvy with PC's. (and it'll save me a lot of time trying to do so). Ta, Neanderthal
Roger
Re: Oop's I didn't do it again.
Hi Roger,
Sorry, mate, but it's not a simple 'Yes' or 'NO'!!
TSRE5 supplies a good Consist Editor. If you've installed TSRE5, you should have a file named 'ConsistEditor.bat' Running this will start the program.
If you do not have TSRE5 installed, but do have ConBuilder or RouteRiter installed, you can use my MSTS_Swap. If there isn't a valid MSTS Registry entry, this program can create a 'skeleton' entry to allow the likes of ConBuilder to run - see the readme.
Cheers,
Ged
Sorry, mate, but it's not a simple 'Yes' or 'NO'!!
TSRE5 supplies a good Consist Editor. If you've installed TSRE5, you should have a file named 'ConsistEditor.bat' Running this will start the program.
If you do not have TSRE5 installed, but do have ConBuilder or RouteRiter installed, you can use my MSTS_Swap. If there isn't a valid MSTS Registry entry, this program can create a 'skeleton' entry to allow the likes of ConBuilder to run - see the readme.
Cheers,
Ged
Intel i5 4690K (3.5GHz), Gigabyte GA-Z97P-D3 m/b, 12GB RAM, NVIDIA GTX 750ti (2GB), ASUS Xonar DS Sound Card, Win 10 Pro 64 bit.
slipperman12- Posts : 2645
Join date : 2013-01-29
Age : 82
Location : North Nottinghamshire
neanderthal likes this post
Re: Oop's I didn't do it again.
Hello Ged, I appear to have got myself in a fix again.I do have TSRE Consist Builder on my PC but sadly just cannot figure out how to work it, and if I go to the Help section all I get is "404 Not Found" notice. Its sad because all the engines and the Consists to run the Route appear to be in there (but obviously not as when I run it I seem to meet Consists coming the other way without engines or engines without consists') So to explain my predicament I have Huddersfield Environs, LYR Heartland and NSR Lines installed but due to me, not working as they should. When I click on acts some say Missing Loco, and others actually run but without any Wagons or Coaches. Anyway to bring this to an end I will (if it wont affect Great Eastern delete the Routes mentioned, and go back to just basic Routes that come with everything installed. Oh for the halcyon days of MSTS proper (when I could still mess it up). Neanderthal
Roger
Re: Oop's I didn't do it again.
Hi Roger,
Please don't take any drastic action, just yet!!
When you double-click the ConsistEditor.bat file you will see the main TSRE5 display. Towards the upper left, you may see a list of installations - double-click the one you want to use, then click the green 'Load' bar at the bottom of the display.
After that, you will see the main ConsistEditor screen showing lists of consists and stock. It is quite easy to use and instructions are shown in the TSRE5 manual (TSRE5 Manual.pdf in the main TSRE5 folder) from page 80. If you can't see the manual, maybe I downloaded it separately - please come back and I'll give you the link (if I can find it!!).
Cheers,
Ged
EDIT : Here's the link to the manual : https://github.com/pwillard/TSRE5-Document
On this screen, left-click the green 'Code' button, then select 'Download ZIP'
Unpack the .zip file to wherever you want it , open the folder then click on book.pdf.
Please don't take any drastic action, just yet!!
When you double-click the ConsistEditor.bat file you will see the main TSRE5 display. Towards the upper left, you may see a list of installations - double-click the one you want to use, then click the green 'Load' bar at the bottom of the display.
After that, you will see the main ConsistEditor screen showing lists of consists and stock. It is quite easy to use and instructions are shown in the TSRE5 manual (TSRE5 Manual.pdf in the main TSRE5 folder) from page 80. If you can't see the manual, maybe I downloaded it separately
Cheers,
Ged
EDIT : Here's the link to the manual : https://github.com/pwillard/TSRE5-Document
On this screen, left-click the green 'Code' button, then select 'Download ZIP'
Unpack the .zip file to wherever you want it , open the folder then click on book.pdf.
Intel i5 4690K (3.5GHz), Gigabyte GA-Z97P-D3 m/b, 12GB RAM, NVIDIA GTX 750ti (2GB), ASUS Xonar DS Sound Card, Win 10 Pro 64 bit.
slipperman12- Posts : 2645
Join date : 2013-01-29
Age : 82
Location : North Nottinghamshire
Re: Oop's I didn't do it again.
Thanks for that Ged, it appears I have a little reading to do.From first glance it also appears to have been much easier in the "Old Days" LOL.
Roger
Re: Oop's I didn't do it again.
Hi Roger,
Don't forget that in the "old days" we were a lot younger and it was easier for us to learn new things!!
Cheers,
Ged
Don't forget that in the "old days" we were a lot younger and it was easier for us to learn new things!!
Cheers,
Ged
Intel i5 4690K (3.5GHz), Gigabyte GA-Z97P-D3 m/b, 12GB RAM, NVIDIA GTX 750ti (2GB), ASUS Xonar DS Sound Card, Win 10 Pro 64 bit.
slipperman12- Posts : 2645
Join date : 2013-01-29
Age : 82
Location : North Nottinghamshire
neanderthal likes this post
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|